Weight | 0.10 lbs |
---|---|
Dimensions | 12 × 24 × .05 in |
Color | full color |
Size | width, height |
Brand | Supreme |
---|
Upload your images one at a time, and quantity amounts needed for that specific image, then click “add to cart”, then proceed to upload your next image.
To see how much your transfer will cost based on dimensions, just enter your dimensions and set quantity amount to 1, to see what that single transfer will cost you
For more info on ordering or preparing your art files correctly, see our video below
Height: | inch |
---|---|
Width: | inch |
Weight | 0.10 lbs |
---|---|
Dimensions | 12 × 24 × .05 in |
Color | full color |
Size | width, height |
Brand | Supreme |
---|
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Set your heat press to 295F
“Make sure your heat press doesn’t have any major heating inaccuracies.”
Pre press for 5-7 seconds to eliminate any moisture in the garment, you should not see any steam rising from your garment once moisture is evaporated
Press garment for the required time based on fabric type
Wait till transfer is completely cool before peeling, then lint roll any remaining residue
After peeling the film use a lint roller to grab any remaining residue or flakey parts not part of your design
Post press for 5 seconds medium pressure of 5, This step embeds the design into the fabric an adds a lil texture, this will also give the foil a slight matte finish so do not over press on this step. If you like the look prior to this step you can skip it
Yes
Wash cold inside out, and hang or tumble dry low
Durability – 50+ Washes
Cotton 50 seconds / Poly 40 Seconds
Cotton - 295F / Polyester - 250F
Medium / Firm 7-8 (60-70 psi)
Cold
If you are building your own gangsheet, your printed art board frame shall not exceed 22.05″ x 22.05″ per sheet as far as length it can be less than 22.05″ if needed. The .05″ is the buffer of blank space between the frame and artwork, so if your length is for example: 18″ add the buffer of .05 = 18.05″ this is recommended. Your actual art will be 22″ x 18″ in that scenario… your length ranging between 1″-22″. Either way when your artwork is done you should have .05″ of blank space around your entire frame.
Be the first to know when some rad stuff is released!
2024 © ALL RIGHTS RESERVED
* Site Design by Esentl * POWERED BY WEB2INK *
Reviews
There are no reviews yet